Showing posts with label Mod Podge. Show all posts
Showing posts with label Mod Podge. Show all posts

Tuesday, January 18, 2011

Photo Plaque

Look at my cute photo plaque.

You need a board, paint, Mod Podge, a photo, and stain if you want it.

You need to make sure that your board it free of any bumps or imperfections, your picture will not be flat if there is.

Wipe off all of the dust.

Paint your board the color you want.

Mod Podge your picture to the board.

Next Mod Podge over your picture.


Add a second coat of Mod Podge, and wait for it all to dry.

After the Mod Podge has dried completely you can stain it. Here is the difference.
Paint the stain all over the top and wait 5-10 mins and then wipe off to desired color is obtained. For mine I used my rag to wipe off the excess and then dabbed it to give it a sponged affect.

If you are going to stain it after the Mod Podge is dry MAKE SURE that you seal the edges of your picture REALLY well with the Mod Podge.

Or it will end up looking like this... my stain seeped under my photo and stained my picture.

I think I will finish it off with some ribbon to cover the stain blotches.
For the most part they turned out well!

Happy Podging
Linked up with:

Monday, December 13, 2010

Cute Magnet Board

This is what I made for my sister in law for Christmas. This year for the gift exchange we set a dollar limit on the gifts, and I came up with this magnet board/recipe holder.

I totally forgot to take a before picture but it looked a little like this ming porcelain plate except it was tin and you could tell it wasn't porcelain. It was a whopping .50 cents at a thrift store.

I spray painted the edges white, and found some cute scrapbook paper, which I then Mod Podged to the middle.

Lately I have been kind of obsessed with keeping all bottle caps off of our drinks and so I took a few Izzy's caps. (I love izzys)! I covered one of them just so I could have more orange but I didn't even have to cover the others because they are so cute. The things that I had on hand made it easy to stay in the budget but if you had to buy the Izzy's, paint, paper, magnets and cloths pins you would still have a pretty cheap gift!

Covered a couple clothes pins and stuck magnets on them and TA-DA! A very cute $1 gift.


Linked up with:

Saturday, November 13, 2010

Kitchen Makeover

It's been a while, yes I know, we have been sick and I haven't felt like doing much but watch movies all day long. Although, I think we are pulling out of it and getting better so I have no excuse now.
I have been waiting FOREVER to show this off so this will make up for lost time!
In our neighborhood they have a 'big trash day' once a month, where you can basically put anything you can't fit in a trash can on the side of the road and someone comes to pick it up and takes it away for you. Well before official trash guys come it's free game! So this is what we picked up a while ago for FREE!

It was in alright shape but the plastic is old and was cracking off the handles,

and the stickers were all gone.

So I took it and turned it in to this!

Water and ice dispenser

Dishwasher buttons.

Oven and burners dials.

Made burners, with tin foil and orange paper.

Added buttons for the microwave.

Covered the handles with packing tape and then Mod Podged fabric over them.

Then made it so there was a landscaped picture in the window.

I did spend $1 on the light above the stove.

I love how it turned out!

So thanks person in the neighborhood that didn't want this anymore, we love it!
Linked up with:

Wednesday, May 12, 2010

Mod Podge Initial

What you need, $3 frame from Wal-mart, white bead board, initial letter, cute paper, sandpaper, black paint, stain, saw, wood glue, staple gun, and paint brushes.

Sand your initial, wipe down and paint.

Trace your letter face down on the back of your cute paper. Cut out slightly inside the lines traced. Trim if needed. Then Mod Podge on to the front of the letter. Distress your letter if wanted.

Cut a piece of bead board to fit your frame (I used the glass to cut the right size). Sand the front of the bead board just enough that the stain will stick. Paint stain on and wipe off to desired look.

I put a bit of wood glue on the initial and then used my staple gun to keep it in place.
Ta-da, done.
*Got the idea from Miss Crafty Pants and then added my twist.